To ensure that the precision connectors are mounted on our coaxial cables at the highest quality level in the shortest possible time, we recommend the precision tools of the company HUBER+SUHNER. As a service we offer you a selection of quality tools.
Extend the life of your coaxial cables. How? Quite simply, by using a torque wrench. Available for N and SMA connectors. To achieve a secure connection of high-frequency cables, they must be
they must be securely connected to each other. The manufacturers specify for their connectors a torque with which they are tightened. It is intended to ensure a secure connection on the one hand and to protect against damage on the other. The N-Type is the oldest coaxial connector in widespread use today. It was developed in 1942 by Paul Neill at Bell Labs. At that time the knowledge about the requirement of such connectors was low and so it has system related shortcomings. This type shows very clearly the effect of not achieving a secure contact.
A rubber sealing washer is inserted in the plug, which must be compressed so that the shielding sleeve of the plug comes to rest on the shoulder of the socket. In general, a torque of 1 Nm is recommended for tightening the N-type. At this torque, it is not guaranteed that the sealing washer has been sufficiently compressed and that safe contact has been achieved. Resonance may occur, blocking the signal in a narrow frequency range.
Order No. | Manufacturer | Description | Torque | Stock |
---|---|---|---|---|
14992 | el-spec GmbH | Torque wrench for Series SMA | SW: 8 mm; 0.9 Nm | on Stock - Order here! |
16312 | el-spec GmbH | Torque wrench for Series N | SW: 19 mm; 1.0 Nm | On Stock - Order here! |
20627 | el-spec GmbH | Torque wrench for Series N | SW: 19,1 mm; 1.6 Nm | on Stock - Order here! |
20888 | el-spec GmbH | Torque wrench for Series N | SW: 18 mm; 1.6 Nm | on Stock - Order here! |
Order No. | Category | Manufacturer | Description | Cable Group | Stock |
---|---|---|---|---|---|
21476 | Tool | Huber & Suhner | Cable stripping tool | EZ47 / EZ86 / EZ 141 | Order here! |
Order No. | Category | Manufacturer | Description | Cable Group | Stock |
---|---|---|---|---|---|
21771 | Tool | Huber & Suhner | Jacket remover | EZ47 / EZ86 / EZ 141 | on Stock - Order here! |
Order No. | Category | Manufacturer | Description | Cable Group | Stock |
---|---|---|---|---|---|
21782 | Tool | Huber & Suhner | Milling cutter | EZ47 / EZ86 / EZ 141 | on Stock - Order here! |
Order No. | Category | Manufacturer | Description | Stock |
---|---|---|---|---|
14833 | Tool | Telegärtner | Crimping Plier | on Stock - Order here! |
Order No. | Category | Manufacturer | Description | Stock |
---|---|---|---|---|
14877 | Tool | Telegärtner | Crimping Inserts | on Stock - Order here! |